Introduction:

D(TD)-Type vertical Bucket Elevator  is composed by moving parts (hopper and traction tape), with the upper section of the drive roller, with the lower section of the idler pulley, intermediate casing, driving device, non-return brake, etc.

Features:

1. This bucket elevator is characterized by rapid centrifugal discharge

2. The rubber conveyor is used as a traction component (Belt Bucket Elevator), so it is not suitable for conveying large pieces of materials with high grinding and cutting resistance.

3. The temperature of the material transported shall not exceed 60 ° c.  150 ° c is allowed if the heat-resistant rubber belt is used.

4. The bucket elevator capacity is 3.1~66 cubic meters per hour and the height is 4~30 meters.

Applications:

suitable for the upward transportation: small and loose powder, granular materials such as coal, sand, dust coke, cement, mineral water, etc.

manufacturing and installation methods:

In order to meet various requirements, the bucket elevator has a variety of manufacturing and installation methods.

1. According to the shape of hopper, it is divided into two types

S method — with deep garden bottom hopper

Q method — with shallow garden bottom hopper

2. There are two types of discharge ports in the upper section

X1 method — discharge port with inclined flange

X2 method — discharge port with horizontal flange

3. According to the lower section of the form of the feed port, it is divided into two

J1 method — the inclined plane of the feed inlet forms a 45 Angle with the horizontal plane

J2 method — the inclined plane of the feed inlet forms a 60 Angle with the horizontal plane

4. According to the position of the side inspection door in the middle housing, it is divided into four types

K1 method — middle housing side with lower left inspection door

K2 method — middle housing side with lower right inspection door

K3 process – middle housing side with upper left inspection door

K4 process – middle housing side with upper right inspection door

5. According to the position of the inspection door on the end face of the middle housing, it is divided into two types

Z1 method — middle housing end face with bottom inspection door

Z2 method — middle housing end face with upper inspection door

6. According to the transmission of the relative position of the elevator, it is divided into two

Left – the drive is on the left

Right – the drive is on the right

√  Since our factory belongs to the machinery industry, the equipment needs to be matched with the process.

The size, model and specifications of the product can be customized according to customer needs.

√  All products in this store are for virtual quotes and are for reference only.

The actual quotation is subject to the technical parameters and special requirements given by the customer.

√  Provide product drawing, manufacturing process and other technical services.

1. Can you offer the customized solution to my case?

Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.

Please send us inquiry if u have any concerns.

2. Is the machine produced safe and reliable?

Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.

3. What is the price of the product?

The price is determined by the specifications of the product, the material, and the special requirements of the customer.

Quotation method: EXW, FOB, CIF, ect.

Payment method: T/T, L/C, ect.

Our company is committed to selling high quality products that meet your requirements at an acceptable price.

4. Why do I trade with your company?

1. Reasonable price and exquisite workmanship.

2. Professional customization, good reputation.

3. Carefree after-sales service.

4. Provide product drawing, manufacturing process and other technical services.

5. Case experience of working with many outstanding domestic and foreign companies over the years.

Regardless of whether a deal is reached or not, we sincerely welcome your letter. Learn from each other and make progress together. Maybe we can be friends of the other side.

5. Are you engineers available for overseas installation and training matters?

At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.

TEL: +86 18037396988

E-mail:  jintejixie@yeah.net