Cheap PriceList for Bucket Elevator Pdf - D(TD)-Type vertical bucket elevator – Jinte
Cheap PriceList for Bucket Elevator Pdf - D(TD)-Type vertical bucket elevator – Jinte Detail:
Introduction:
D(TD)-Type vertical Bucket Elevator is composed by moving parts (hopper and traction tape), with the upper section of the drive roller, with the lower section of the idler pulley, intermediate casing, driving device, non-return brake, etc.
Features:
1. This bucket elevator is characterized by rapid centrifugal discharge
2. The rubber conveyor is used as a traction component (Belt Bucket Elevator), so it is not suitable for conveying large pieces of materials with high grinding and cutting resistance.
3. The temperature of the material transported shall not exceed 60 ° c. 150 ° c is allowed if the heat-resistant rubber belt is used.
4. The bucket elevator capacity is 3.1~66 cubic meters per hour and the height is 4~30 meters.
Applications:
suitable for the upward transportation: small and loose powder, granular materials such as coal, sand, dust coke, cement, mineral water, etc.
manufacturing and installation methods:
In order to meet various requirements, the bucket elevator has a variety of manufacturing and installation methods.
1. According to the shape of hopper, it is divided into two types
S method — with deep garden bottom hopper
Q method — with shallow garden bottom hopper
2. There are two types of discharge ports in the upper section
X1 method — discharge port with inclined flange
X2 method — discharge port with horizontal flange
3. According to the lower section of the form of the feed port, it is divided into two
J1 method — the inclined plane of the feed inlet forms a 45 Angle with the horizontal plane
J2 method — the inclined plane of the feed inlet forms a 60 Angle with the horizontal plane
4. According to the position of the side inspection door in the middle housing, it is divided into four types
K1 method — middle housing side with lower left inspection door
K2 method — middle housing side with lower right inspection door
K3 process – middle housing side with upper left inspection door
K4 process – middle housing side with upper right inspection door
5. According to the position of the inspection door on the end face of the middle housing, it is divided into two types
Z1 method — middle housing end face with bottom inspection door
Z2 method — middle housing end face with upper inspection door
6. According to the transmission of the relative position of the elevator, it is divided into two
Left – the drive is on the left
Right – the drive is on the right
Project |
Hoist Type |
|||||||
D160 |
D250 |
D350 |
D450 |
|||||
S Making Method |
〇 Making Method |
S Making Method |
〇 Making Method |
S Making Method |
〇 Making Method |
S Making Method |
Q Making Method |
|
Transport Capacity(m³/h ) |
8 |
3.1 |
21.6 |
11.8 |
42 |
25 |
69.5 |
48 |
Hopper Capacity(L ) |
1.1 |
0.65 |
3.2 |
2.6 |
7.8 |
7 |
15 |
14.5 |
Bucket Pitch(mm ) |
300 |
300 |
400 |
400 |
500 |
500 |
640 |
640 |
Tape Weight With Hopper(kg/m ) |
4.72 |
8.8 |
10.2 |
9.4 |
12.1 |
12.1 |
21.3 |
21.3 |
Conveyor Tape: width(mm) |
200 |
300 |
400 |
500 |
||||
Conveyor Tape: number of layers |
4 |
4 |
5 |
5 |
||||
Hopper Speed(m/s ) |
1 |
1.25 |
1.25 |
1.25 |
||||
Rotation Of Transmission Drum Shaft(r/min ) |
47.5 |
47.5 |
47.5 |
37.5 |
||||
Maximum Bulk Of Material(mm) |
25 |
35 |
45 |
55 |
Product detail pictures:
Related Product Guide:
Six ways to reduce the “resonance” of the vibrating screen
We've got a really efficient group to deal with inquiries from prospects. Our purpose is "100% customer fulfillment by our product excellent, price & our group service" and enjoy a superb track record amid clientele. With many factories, we can easily deliver a wide selection of Cheap PriceList for Bucket Elevator Pdf - D(TD)-Type vertical bucket elevator – Jinte , The product will supply to all over the world, such as: Peru , Liverpool , Dominica , Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
√ Since our factory belongs to the machinery industry, the equipment needs to be matched with the process.
The size, model and specifications of the product can be customized according to customer needs.
√ All products in this store are for virtual quotes and are for reference only.
The actual quotation is subject to the technical parameters and special requirements given by the customer.
√ Provide product drawing, manufacturing process and other technical services.
1. Can you offer the customized solution to my case?
Our company has a professional R & D team, and be able to customize mechanical products for you according to your needs. At the same time, our company guarantees that every product produced for you is in compliance with the national and industry standard, and no quality problems.
Please send us inquiry if u have any concerns.
2. Is the machine produced safe and reliable?
Absolutely yes. We are a company specializing in the production of machinery. We have advanced technology, excellent R & D team, superb process design and other advantages. Please believe that we can fully meet your expectations. The machines produced are in line with national and industry quality standards. Please feel free to use.
3. What is the price of the product?
The price is determined by the specifications of the product, the material, and the special requirements of the customer.
Quotation method: EXW, FOB, CIF, ect.
Payment method: T/T, L/C, ect.
Our company is committed to selling high quality products that meet your requirements at an acceptable price.
4. Why do I trade with your company?
1. Reasonable price and exquisite workmanship.
2. Professional customization, good reputation.
3. Carefree after-sales service.
4. Provide product drawing, manufacturing process and other technical services.
5. Case experience of working with many outstanding domestic and foreign companies over the years.
Regardless of whether a deal is reached or not, we sincerely welcome your letter. Learn from each other and make progress together. Maybe we can be friends of the other side.
5. Are you engineers available for overseas installation and training matters?
At the client’s request, Jinte can provide installation Technicians to supervise and assist in the assembly and commissioning of the equipment. And all the costs during the mission needs to be covered from you.
TEL: +86 18037396988
E-mail: jintejixie@yeah.net
By Jocelyn from Jamaica - 2018.11.02 11:11
In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
By Deirdre from UK - 2018.08.12 12:27